Gator Xtreme Edge
The Ultimate Reinforced 3D Micro-Fiber mesh Structural Edge
GATOR XTREME EDGE is the ultimate 3D reinforced micro-fiber mesh and polymer modified structural edge, which creates a strong and economical edging solution for any hardscape project. GATOR XTREME EDGE can be used on any traditional, permeable, or overlay application using concrete pavers and slabs or natural and wet cast stones. GATOR XTREME EDGE offers permanent continuous lateral support
- Traditional, open graded and permeable applications and overlay
- Pedestrian and vehicular use
- Concrete pavers, slabs, Natural and Wet cast stone applications
- High Performance polymers for added strength
- Reinforced with 3D micro-fiber mesh
- Formulated for better workability
- Continuous lateral support matrix
- Freeze and thaw resistant
- 2X Stronger
- 2X Faster setting time
- More flexible
- Easier and faster to install
| Product | Unit Size | Units per Pallet |
|---|---|---|
| GATOR XTREME EDGE | 20 kg | Store outdoors under a covered area, protected from rain and snow or store indoors in a well ventilated area at temperatures ranging from -40 to 40°C. Skid of GATOR XTREME EDGE can be double stacked for storage, but not in transport. |
APPLICATION INSTRUCTIONS
INSTALLATION STEPS
Always refer to the latest GATOR XTREME EDGE Technical Data Sheet (TDS) at AllianceGator.com before installing GATOR XTREME EDGE. Concrete pavers, slabs, Natural and Wet cast stones should be installed according to the industry established best practices for the base, setting bed, and drainage of a hardscape project.
STEP 1 REMOVING BEDDING MATERIAL
Remove all excess bedding material 10 cm at the edge of the hardscape project (See photo on the right).
STEP 2 MIXING GATOR XTREME EDGE
Mix 1.7 liter of water with one bag 20 kg of XTREME EDGE until you obtain a homogeneous mixture.
