GATOR EDGE RIGID & FLEX are made with 100% Polypropylene Co-Polymer. This will give it great strength as well as provide great flexibility. We have a Rigid model which is ideal for straight applications and the Flex model that can be used for all curved applications such as walkways, paths, entrances etc. Both the Rigid and Flex can be locked together with the “Twist & Lock” system. Finally the Rigid could be transform in a partial Flex by cutting the bridge support between each triangular angles.
| Product | Unit Size | Units per Pallet |
|---|---|---|
| GATOR EDGE FLEX | 1 piece = 8 linear feet (2.44 m) | 28 Master-packs = 5,376 linear feet |
| GATOR EDGE RIGID | 1 piece = 8 linear feet (2.44 m) 1 Mini-pack = 6 pieces = 48 linear feet 1 Master-pack = 4 Mini-packs = 192 linear feet | 28 Master-packs = 5,376 linear feet |
Use 10” Gator Nail. Use one 10″ Gator Nail every second hole and at every “Twist & Lock” junction, this will ensure continuous lateral support. Ensure edges are installed firmly against the pavers on a minimal compacted structural aggregate base of 6″ (15 cm) deeper and wider on all sides than the paved area
Using Gator Base Screws. When using Gator Base, use Gator Base Screws at every second hole and every “Twist & Lock” junction to ensure continuous lateral support. Ensure edges are installed firmly against the pavers. The Gator Base must be 6″ (15 cm) wider on all sides than the paved area.
