Gator Edge Rigid and Flex - Alliance Gator

GATOR EDGE RIGID & FLEX

Unique Twist & Lock system, engineered with supported triangular angles at all key points, providing a strong lateral support, essential for the load transfer.

Description

Ideal for

Features

Coverage & Packaging

Description

Ideal for

Features

Coverage & Packaging

Product	Unit Size	Units per Pallet
GATOR EDGE FLEX	1 piece = 8 linear feet (2.44 m) 1 Mini-pack = 6 pieces = 48 linear feet 1 Master-pack = 4 Mini-packs = 192 linear feet	28 Master-packs = 5,376 linear feet
GATOR EDGE RIGID	1 piece = 8 linear feet (2.44 m) 1 Mini-pack = 6 pieces = 48 linear feet 1 Master-pack = 4 Mini-packs = 192 linear feet	28 Master-packs = 5,376 linear feet

INSTALLATION INSTRUCTIONS

Rigid can turn flexible in 3 easy steps

STEP 1

It can be installed either before or after the paver installation.

STEP 2

Use one 10″ nail every second hole and at every “Twist & Lock” junction, this will ensure continuous lateral support. Ensure edges are installed firmly against the pavers on a minimal compacted structural aggregate base of 6″ (15 cm) deeper and wider on all sides than the paved area.

STEP 3

When using Gator Base, use Gator Base Screws at every second hole and every Twist & Lock junction to ensure continuous lateral support. Ensure edges are installed firmly against the pavers. The Gator Base must be 6″ (15 cm) wider on all sides than the paved area.

Back to top